We Are Hiring!

We are looking to expand our team!  If you like working with your hands and appreciate the attention and care that goes into handmade pieces, then you might be just the right fit for us. 

Positions up for grabs are listed below.  If you have further questions or interested in applying, send me an email (sandy@pulpfunction.ca) or give me a ring (416-358-6033).

 

Painter in Toronto Area and Vancouver Area

    There are two painting positions available - one in Toronto area and one in Vancouver area.  We are looking for someone with experience in working with a spray gun.  Person will be priming, sanding and finishing small (12") to large (48") sized pieces made out of MDF.  

    Person MUST own or have access to a spray booth facility.  Person will also need to have access to a vehicle to do pick-ups (Newmarket) and drop-offs (North York) of materials.

    Person will either be paid on a per piece or per hour basis, depending on volume of work.  Pieces are typically made to order and therefore, quantities and work load will vary throughout the year.  Average commitment will be approximately 5 to 8 hours per week.

     

    CNC Operator in Vancouver Area

      This position calls for someone with experience in CAD (Fusion 360, AutoCAD or similar).  This person  MUST also have access to a CNC and laser cutter and have the ability to store large sheets of MDF on a long term basis.  Work entails cutting small (12") to large (48") sized pieces out of large sheets (4'x8') of MDF.  

      Person will be paid $10 to $80 per piece depending on size and intricacy of design.  Pieces are typically made to order and therefore, quantities and work load will vary throughout the year.  Average commitment will be approximately 5 to 8 hours per week.

       

       

      Leave a comment